There are many kinds of machine protection used in the factory, including protective cover, protective fence, protective net, protective partition and so on. Its purpose is to protect the safety of workers and prevent the dangerous situation in the production process. At present, the industry has certain requirements for the use and production of mechanical protection products, and the use of aluminum profiles to make machine protection is no exception. The following are the conditions to be met for the aluminum profile machine protection production:

1, the protective frame structure design should be reasonable, the use of the dangerous part should be fully considered, for the possible resulting in flying objects and their own loose objects can play a protective role, in addition to dealing with the normal danger situation, but also should protect the accidental injury in the circumstances. If the design is not appropriate, it will affect both the protection effect and the appearance quality.

2, good quality, to ensure the intensity of the use of the demand. You need to choose the right specifications in the thousands of aluminum specifications to customize. Before selection, fully analysis of the machine and equipment in static and dynamic situations, choose different profile specifications according to the requirements and different use areas, so as to make the best use of things.

3, in order to prevent fingertips, fingers, palms, upper limbs, toes and other accidental injuries, the distance between the holes, eyes, doors and Windows and the ground should be within a reasonable range, these all have a safety distance standard, must not be shorter than the safety distance, otherwise the employees will not pay attention to safety accidents.

4. The protective surface of the machine should be smooth and without burrs, which requires the cleaning of the burrs in the processing process, so that the surface of aluminum profiles and accessories has no sharp edges and corners, and should not become a new source of danger.

5. The machine protection area should also be reasonably arranged, there is no line of sight occlusion, and can clearly observe the operation of the machine and equipment.

6, the machine protection should be equipped with an alarm device, when the failure occurs, timely power failure, to reduce unnecessary losses.

7, machine protection use of aluminum profile is not need to paint, aluminum profile color of silver white, if the protection products need the color, you can use different colors of plate and strip, play a warning role.